boat build photos

mikeprojectboat · Post by **mikeprojectboat** » Sun Apr 22, 2007 2:55 pm

At long last I have managed to put SOME photos on the site, not all of them as my computer is complaining.!!! have managed about 25, still some to load at a later date. they show items that have been made and fitted,including bow roller,pulpit,pushpit,fairleads, and rail holders,ect. happy viewing. regards mikeprojectboat

mikeprojectboat · Post by **mikeprojectboat** » Mon Apr 23, 2007 11:44 am

Just had a look at the pics,sorry they are not that good,used my daughters mobile phone.!! regards mike in sunny norfolk

Terry · Post by **Terry** » Mon Apr 23, 2007 3:56 pm

Pics look OK to me. The progress on the boat looks great as well!
Terry

Rondonay · Post by **Rondonay** » Mon Apr 23, 2007 4:58 pm

Mike, these look great!
I was a bit puzzled by the tabernacle arrangement. The mast is really heavy to raise & lower, and pivots on the bolt through the housing, can yours do that or is it supposed to sit in or over the tube? Feel free to have another look at ours.
Best wishes,

Pauline

mikeprojectboat · Post by **mikeprojectboat** » Tue Apr 24, 2007 11:42 am

Pauline,you made me laugh.!!! My mast is the next item to sort out ,and will be the normal set up. but I bolted some three by two into the mast slot and abit offtwo by two for the boomto work out clearances. also a bit of rope to support the cover.so it looks a bit odd , regards mike in hot and sunny sunny norfolk.

Rondonay · Post by **Rondonay** » Tue Apr 24, 2007 4:47 pm

:roll: So what was the bit that looked like metal tubing from above??

mikeprojectboat · Post by **mikeprojectboat** » Wed Apr 25, 2007 8:38 am

Pauline, think the picture your looking at is a top view of the side railholder .?MIKE

Rondonay · Post by **Rondonay** » Wed Apr 25, 2007 3:35 pm

Could be. :0)

Post generated using Mail2Forum (http://www.mail2forum.com)

Terry · Post by **Terry** » Thu Apr 26, 2007 10:19 pm

Hi Mike & Pauline
I hope you don’t mind but in the interest of tidiness I have moved some of your post to the rigging section.
Regards Terry
PS while I was at it I moved Paulines bit about boom tents to the 'Canvas' section (Just flexing my muscles as a moderator)

Rondonay · Post by **Rondonay** » Fri Apr 27, 2007 3:30 pm

No problem :0)

Post generated using Mail2Forum (http://www.mail2forum.com)

Swift 18 Owners