Welding Repairer for aluminium rudder stock

Archive of emails sent on Yahoo Groups mailing list
Post Reply
chrisswift18

Welding Repairer for aluminium rudder stock

Post by chrisswift18 » Wed Oct 18, 2006 8:01 pm

The winter maintenance begins....

There are slight cracks in the welds in the aluminium rudder stock of
my Swift. Does anyone know anyone in the Essex Blackwater area who can
weld aluminium?

I have no luck yet.

Thanks

Chris

Post generated using Mail2Forum (http://www.mail2forum.com)

cherrypieconwy

Welding Repairer for aluminium rudder stock

Post by cherrypieconwy » Thu Oct 19, 2006 12:10 pm

--- In Swift_18@yahoogroups.com, "chrisswift18" <chris@...> wrote:
The winter maintenance begins....

There are slight cracks in the welds in the aluminium rudder stock of
my Swift. Does anyone know anyone in the Essex Blackwater area who
can
weld aluminium?

I have no luck yet.

Thanks

Chris
Hi Chris, type easyweld into your browser and check out durafix
aluminium welding using a rod and blowlamp the cost for a starter pack
is about £10 this diy method may be of interst to you...Gary

Post generated using Mail2Forum (http://www.mail2forum.com)

Gary

Welding Repairer for aluminium rudder stock

Post by Gary » Thu Oct 19, 2006 1:20 pm

Let your fingers do the walking!

Failing that virtually every marina has a welder experienced in non-ferrous stuff. Persevere, the job will probably cost next to nothing but the piece of mind will be priceless.

Gary (Warr)

‘Silver Lining’ CCSC Weymouth



On 18/10/06 21:00, "chrisswift18" <chris@JA411iuVTh54x4Cn_eHqgS4ixBqBaEfCWSN-nusn1F1T6Jfaw9zR37zkiIGpbwBnJkRXOGjzY6tAnxXJdmPHpg.yahoo.invalid.uk> wrote:




The winter maintenance begins....

There are slight cracks in the welds in the aluminium rudder stock of
my Swift. Does anyone know anyone in the Essex Blackwater area who can
weld aluminium?

I have no luck yet.

Thanks

Chris


Post generated using Mail2Forum (http://www.mail2forum.com)

Post Reply