Hi all just thinking where to fit my depth transducer to my boat the boat is on the water so dont really want to drill a whole in the hull or is this the best and only way todo it .....where have you fitted yours .....thanks
Dave
sunny scotland
fitting a depth transducer
-
- Making way
- Posts: 33
- Joined: Sat Jun 21, 2008 7:51 am
- Location: Christow Devon
- Boat Name: nuestro
fitting a depth transducer
Greetings David
Mine is glued to the inside of the hull under the sink unit; works fine there.
Philip
‘Nuestro’
From: David mclardie [mailto:forum-electronics@swift18.org]
Sent: 16 June 2010 11:23
To: forum-electronics@swift18.org
Subject: [Swift 18] fitting a depth transducer
Hi all just thinking where to fit my depth transducer to my boat the boat is on the water so dont really want to drill a whole in the hull or is this the best and only way todo it .....where have you fitted yours .....thanks
Dave
sunny scotland
Post generated using Mail2Forum (http://www.mail2forum.com)
Mine is glued to the inside of the hull under the sink unit; works fine there.
Philip
‘Nuestro’
From: David mclardie [mailto:forum-electronics@swift18.org]
Sent: 16 June 2010 11:23
To: forum-electronics@swift18.org
Subject: [Swift 18] fitting a depth transducer
Hi all just thinking where to fit my depth transducer to my boat the boat is on the water so dont really want to drill a whole in the hull or is this the best and only way todo it .....where have you fitted yours .....thanks
Dave
sunny scotland
Post generated using Mail2Forum (http://www.mail2forum.com)
- Attachments
-
- ~WRD000.jpg (823 Bytes) Viewed 6397 times