fitting a depth transducer

Discussions related to onboard electronic toys
Post Reply
David mclardie
Under way
Posts: 17
Joined: Thu May 28, 2009 9:19 pm

fitting a depth transducer

Post by David mclardie » Wed Jun 16, 2010 10:22 am

Hi all just thinking where to fit my depth transducer to my boat the boat is on the water so dont really want to drill a whole in the hull or is this the best and only way todo it .....where have you fitted yours .....thanks

Dave

sunny scotland :)

whiteede
Making way
Posts: 33
Joined: Sat Jun 21, 2008 7:51 am
Location: Christow Devon
Boat Name: nuestro

fitting a depth transducer

Post by whiteede » Wed Jun 16, 2010 12:13 pm

Greetings David
Mine is glued to the inside of the hull under the sink unit; works fine there.
Philip
‘Nuestro’

From: David mclardie [mailto:forum-electronics@swift18.org]
Sent: 16 June 2010 11:23
To: forum-electronics@swift18.org
Subject: [Swift 18] fitting a depth transducer



Hi all just thinking where to fit my depth transducer to my boat the boat is on the water so dont really want to drill a whole in the hull or is this the best and only way todo it .....where have you fitted yours .....thanks

Dave

sunny scotland

Post generated using Mail2Forum (http://www.mail2forum.com)
Attachments
~WRD000.jpg
~WRD000.jpg (823 Bytes) Viewed 2887 times

Post Reply